lasasfinance.blogg.se

Aoc monitor service
Aoc monitor service









Refer to Table 2 for cabling specifications for each 25G product. For more details, refer to the document “ Transceiver Module Group (TMG) Compatibility Matrix”. This module has an industrial temperature range.Ĭisco 25G transceivers are supported on Cisco switches.

Aoc monitor service full#

The module requires RS-FEC on the host ports for full reach operation at 25G. The Cisco 25GBASE-ER Module supports a link length of 40 kilometers on standard Single-Mode Fiber (SMF) G.652 at 25G. This module also supports CPRI datarates options 7, 8, 9 and 10. This module has an industrial temperature range. The SFP-10/25G-BXU-I transmits at a 1270nm wavelength and receives a 1330nm signal. SFP-10/25G-BXD-I transmits at 1330nm channel and receives at 1270nm signal. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. A SFP-10/25G-BXD-I device is always connected to a SFP-10/25G-BXU-I device with a single strand of standard SMF.

aoc monitor service

The Cisco 10GBASE-LR/10GBASE-BR/25GBASE-BR Module supports a link length of 10 kilometers on a single strand of standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. In some applications using BASE-R FEC the module can support 3.5km and without FEC it can support 1.5km, depending on fiber quality.Ĭisco SFP-10/25G-BXD-I and SFP-10/25G-BXU-I (single-fiber bidirectional applications) The Cisco 10/25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. This module requires RS-FEC on the host ports for operation at 25G. Using BASE-R FEC the module can support 70/100m over OM3/4 and with-out FEC it can support 30/50m over OM3/4 at 25G *.

aoc monitor service

This module requires RS-FEC on the host port for full reach operation at 25G. It also supports link lengths of 82m over OM2 at 10G, and up to 70m over OM2 at 25G. The Cisco 10/25GBASE-CSR Module supports a link length of up to 300/400m over OM3/4 at 10G, and up to 300/400m over OM3/4 at 25G *. This module requires RS-FEC on the host ports. The Cisco 25GBASE-SR Module supports a link length of 70/100m on OM3/4 MMF. Cisco offers Active Optical Cables in lengths of 1, 2, 3, 4, 5, 7, and 10 meters.ĪOC cable require BASE-R FEC, or RS-FEC on the host ports. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. Cisco offers passive copper cables in lengths of x= 1, 1.5, 2, 2.5, 3, 4 and 5 meters.ġm, 1.5m, and 2m cables do not require FEC on the host ports 2.5m and 3m cables require BASE-R FEC (also known as FC-FEC) on the host ports 4m and 5m cables require RS-FEC on the host ports.Ĭisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors.

aoc monitor service

25GBASE-AOC Active Optical Cable 10-meterġ0/25GBASE-LR SFP28, Industrial Temperature Module for SMFġ0GBASE-LR, 10GBASE-BR10, 25GBASE-BR10 SFP28, Bidirectional, Industrial Temp Module for SMFĢ5GBASE-ER, SFP28 Industrial Temperature Module for SMFĬisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks.









Aoc monitor service